Filter
Top Products
16
www.seuservice.com
Phillips Type Screwdriver
Socket Wrench (for hexagon bolts and nuts)
Ratchet Handle
Phillips Type Screwdriver
(Short)
T15 Tamper Proff Bit
T25 Tamper Proff Bit
T27 Tamper Proff Bit
T35 Tamper Proff Bit
Bit Driver
Tools required for the work
ASSEMBLING AND POSITIONING THE MAIN PROJECTION UNIT
Follow the steps outlined in the following procedural diagrams.
1
Place monitor upon the monitor stand having a care that the
cords do not end up underneath the monitor when placing it
upon the stand.
Also have a care to line the monitor up left to right so it fits
centered upon the stand.
Slide the monitor fully forward on the stand being sure that it
is fully under the front bracket as shown in the image to the
right. If the monitor is not fully under the lip then the rear
mounting bracket will not align properly with the holes in the
monitor stand.
Cresent Wrench for Bolts