Filter
Top Products
20
www.seuservice.com
Station Portal
Run the fiber optic cable from the Left station of the Right Station
Set through the Station Portal into the Right station of the Left
Station set. Then plug the fiber optic cable into the proper port on
the Naomi Filter Board.
(6) Pem Studs
Secure the (6) Pem Studs between the Left Station Set and the
Right Station Set. There are 3 in the front and 3 in the rear of the
Station Sets.
Front Center
Left and Right Sides
Place on the Unit the (3) brackets to the front and sides of the
Station Sets. The front bracket takes Phillips screws where as
the side brackets take tamper proof screws.