Filter
Top Products
17
www.seuservice.com
Secure the monitor to the monitor stand with the Monitor
mounting bracket supplied with your unit. There are 3 screws
that go in the back of the monitor and 5 screws that secure the
bracket to the monitor stand.
Plug the DB15 plug to the video out female DB15 in the
back of the montior. Also be sure to connect the Bulb Fan
connector then run the monitor power cord into the cabinet in
the back right corner.
Place the cord cover inside the monitor plug area and secure to
the moitor base with two screws. Then place the rear formed
bracket on the back of the stand to cover the cords securing
it to the monitor base with six screws in the back and one on
each side of the bracket.
Place and secure the triangle brackets on each side of the
monitor with two screws each to the montior base.