Filter
Top Products
2-11
♦
Hard Disk Drive
Switch off power to the game. Unlock and remove the rear cabinet door. Remove the perforated
metal cover over the game electronics. Disconnect the DC power cable from the hard disk drive.
Unplug the ribbon cable from the hard drive. Don’t disconnect the cables from the CPU Board.
Loosen the drive mounting screws and lift the drive out of its mounting bracket. Remove the screws.
Save them for reuse in future hard drive installations. When returning a hard drive to your distributor,
pack it in an anti-static bag. Box the drive in approved shipping container 08-8068.
NOTICE:
Hard disk drives are very fragile! Handle them with care. Do not stack
or drop hard disk drives. Keep disk drives away from magnets, heat and vibration.
♦
Joysticks
Switch off power to the game. Open the player control panel. Mark and disconnect the wiring harness
from a joystick. To separate the joystick from the player panel, first remove the joystick shaft. An E-
ring secures the shaft. Disengage this E-ring with a small, flatblade screwdriver. Grasp the joystick
knob. Extract the stick from the assembly. Then remove 8-32 tamper-resistant (KEPS®) nuts from the
corners of the joystick base. Retain fasteners for reassembly.