Filter
Top Products
7-11
Software Update Troubleshooting Table
SYMPTOM CAUSE REQUIRED ACTION
You skipped steps or
performed them out
of sequence.
Return update components to kit, reinstall
original parts in cabinet, and try process again.
•
Update didn’t work
•
After update procedure,
screen reports lower than
latest version
Installation error may
have damaged
device.
1. Inspect for bent or broken pins.
2. If you have another kit, try it.
3. Ask your distributor to check your floppy disk.
Mismatched boot
update version and
hard drive.
Once you’ve updated disk drive, CPU
instructions must be at correct version to make
use of new data stored on disk. Be certain that
boot ROM device resides in proper socket.
•
No Attract Mode screens
•
Board indicators illuminate,
but screen is completely
blank
You may have
installed devices in
wrong sockets.
1. Install disk ROM. Only use upgrade socket for
hard disk drive updates. During game play,
upgrade socket must be empty.
2. Load ROM contents onto drive.
3. Remove ROM from game.
NOTICE:
Someday, software updates for your VGM (video game machine) might
become available. These upgrades may improve your VGM’s performance or add new
VGM features. Such upgrades tend to appear sometime after factory first releases
VGM. Contact your distributor for information about updates.