EPL Commands
B
60
14245L-003 Rev. A EPL Programming Guide 12/16/13
Data with the RTC Time & Date Functions
The “Data” field can be replaced by or combined with the following variables:
• TT = Prints the current time at this position in the predefined format. See the TT command
for format selection. This variable is available only if the printer RTC Time & Date option
is installed.
• TD = Prints the current date at this position in the predefined format. See the TD
command for format selection. This variable is available only if the printer RTC Time &
Date option is installed.
Because the RSS-14 bar code symbols only support numeric data, the time and date data
recalled by the TD and TT commands must not include delimiters, i.e. "/,-, or :" or any other
delimiters
Example 1 •
N↵
B100,100,0,RL,4,4,40,B,"1234567890"↵
B100,300,0,R14,4,4,40,B,"1234567890"↵
B100,500,0,RS,4,4,52,B,"1234567890"↵
B100,700,0,RL,4,4,40,B,"9876543210"↵
P↵
will produce this label:
