EPL Commands
PA
136
14245L-003 Rev. A EPL Programming Guide 12/16/13
PA
Print Automatic
Description Use this command in a stored form sequence to automatically print the form
(as soon as all variable data has been supplied).
Syntax PAp
1
,[p
2
]
Parameters This table identifies the parameters for this format:
Parameters Details
p
1
= Number of label sets.
Can be variable data.
Accepted Values: 1 to 9999
p
2
= Number of copies of
the same labael
Can be variable data.
Accepted Values: 1 to 9999
Sets the number of copies of each label (used in combination
with counters) to print multiple copies of the same label. This
value is only set when using counters.
Example •
FK"1"↵ : delete form named “1"
FS"1"
↵ : start form store sequence
V00,10,N,"prompt:"
↵ : define variable 00
V01,1,N,"prompt:"
↵ : define variable 01
V02,4,N,"prompt:"
↵ : define variable 02
A24,24,0,4,1,1,N,V00
↵ : write a line of text including
variable
PAV01,V02
↵ : print 1 label automatically
FE
↵ : end form store sequence
FR"1"
↵ : retrieve form “1"
?
↵ : get variables
This Is Text
↵ : data for V00
3
↵ : data for V01= p1- number of
sets
2
↵ : data for V02= p2 - number of
copies
