A SERVICE OF

logo

269
SGD Wireless Commands
wlan.essid
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.essid
Description This printer setting refers to the printer’s stored ESSID. Setting the ESSID to ""
will set the printer in a "broadcast" mode. For printer support, see SGD Command
Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the stored ESSID
value.
Format: ! U1 getvar "wlan.essid"
setvar
This command instructs the printer to change the ESSID.
Format: ! U1 setvar "wlan.essid" "value"
Va lues: 32 character alphanumeric string
Default: "125"
Example • This setvar example shows the value set to "125".
! U1 setvar "wlan.essid" "125"
When the setvar value is set to "125", the getvar result is "125".