175
EPL Commands
^ee
12/16/13 EPL Programming Guide 14245L-003 Rev. A
^ee
Error Report - Immediate
Description Use this command to get printer errors and status reports immediately. The
^ee command must be sent via the USB and RS-232 serial interface.
Mobile printers, such as the TR 220, ignore this command.
The printer will report 4 bytes back to host in the following format:
XX<CR><LF>
XX = Error/Status code
<CR>= Carriage Return (ASCII 13 dec.)
<LF>= Line Feed (ASCII 10 dec.)
Syntax ^ee
Parameters There are no parameters for this format.
Code Error/Status Description
00 No Error
01 Syntax Error
02 Object Exceeded Label Border
03 Bar Code Data Length Error (e.g.: EAN-13 is a 12 or 1 digit only)
04 Insufficient Memory to Store Data
05 Memory Configuration Error
06 RS-232 Interface Error
07 Paper or Ribbon Empty
08 Duplicate Name: Form, Graphic or Soft Font
09 Name Not Found: Form, Graphic or Soft Font
10 Not in Data Entry Mode (See ? Command)
11 Printhead Up (Open)
12 Pause Mode or Paused in Peel Mode
50 Printer Busy - Processing Print Job
80* Undefined
81* Cutter Jammed or Not Installed
82* AutoSense or Sensor Failure
83* Illegal Interrupt occurred
84* Excessive Media Feeding
* Requires Intervention: Press Feed or Reset (^@ command)
