A SERVICE OF

logo

133
EPL Commands
O
12/16/13 EPL Programming Guide 14245L-003 Rev. A
S = Reverse sensor
operation
Reverse the Transmissive (Gap) Sensor’s normal operation.
Fp
1
= Form Feed Setting
p
1
= Sets the type of operation the feed button .
f = Default, normal operation. Tap to feed.
r = Reprint last label printed.
i = Ignore the feed button.
Example •
O : disables all options.
OC
: enables cutter only, labels
are cut after each
: label is printed, disables
all other options
OD
: enables direct thermal mode
on thermal transfer
: printers, disables all other
options
OCb
: labels are cut after a batch
of five has printed,
: disables all other options
P5 : Sets the number of labels to
print before the cut
Parameters Details