A SERVICE OF

logo

Open as PDF
next previous
301
SGD Wireless Commands
wlan.signal_quality
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.signal_quality
Description This command instructs the printer to return the current signal quality of the
wireless network. Values below 40% represent a poor signal quality, and radio communication
is not reliable. For printer support, see SGD Command Support on page 315.
Type getvar
This table identifies the command for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to return the current signal quality of
the wireless network.
Format: ! U1 getvar "wlan.signal_quality"
Example • In this example, the getvar result is the current signal_quality value.
! U1 getvar "wlan.signal_quality"