281
SGD Wireless Commands
wlan.ip.port
12/16/13 EPL Programming Guide 14245L-003 Rev. A
wlan.ip.port
Description This printer setting refers to the wireless print server’s port number that the
TCP print service is listening on. Normal TCP communications from the host should be
directed to this port.For printer support, see SGD Command Support on page 315.
Type getvar; setvar
This table identifies the commands for this format:
Note • For details on SGD command structure, see Command Structure on page 250.
Commands Details
getvar
This command instructs the printer to respond with the wireless printer
server’s TCP/UDP port number.
Format: ! U1 getvar "wlan.ip.port"
setvar
This command instructs the printer to set the wireless print server’s
TCP/UDP port number.
Format: ! U1 setvar "wlan.ip.port" "value"
Va lues: 1 - 65535 (excluding any ports currently used by other services,
such as 21, 23, 80, and 515).
Default: "9100"
Example • This setvar example shows the value set to "9100".
! U1 setvar "wlan.ip.port" "9100"
When the setvar value is set to "9100", the getvar result is "9100".
