A SERVICE OF

logo

EPL Commands
W
166
14245L-003 Rev. A EPL Programming Guide 12/16/13
W
Windows Mode
Description This command is used to disable/re-enable the Windows command mode.
When enabled, the printer will accept Windows mode escape sequences to print data. When
disabled, escape sequences will be ignored.
The Windows mode escape sequences are only used by the optional Windows printer driver.
When working with a main frame or other non-Windows host, this mode can be disabled to
prevent erratic operation.
Syntax Wp
1
Parameters This table identifies the parameters for this format:
Parameters Details
p
1
= Windows Mode
Enabled
Accepted Values:
Y = enabled
N = disabled
Default Value: N (disabled)