System Administration
There are four areas on the screen. The Information area shows general information about
the Access Port. The Received and Transmitted areas of the screen display statistics for
the cumulative packets, bytes, and errors received and transmitted through the Access Port.
The Associated Mobile Units section lists the MUs and provides information on specific
MUs that are currently transmitting through the Access Port.
General Access Port Information
Information
Field
Description
Location
The site location of the Access Port (an optional field that the
administrator fills in on the Wireless --> Access Ports --> <Access
Port Name> screen).
HW Address
The Media Access Control (MAC) address of the Access Port. This
value is typically set at the factory and can be found on the bottom of
the Access Port.
Adopted by
The WLANs that currently adopt this access port (see Network
Configuration --> Wireless for the Access Port Adoption List)
Channel
This field indicates the channel for communications between the
Access Port and mobile units. To specify the value, go to the
corresponding Access Port screen.
Power
The power level in milliwatts (mW) for RF signal strength is specified
on the corresponding Access Port screen.
Click on the Clear all AP Stats button to clear all the statistics for the selected Access
Port.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 78
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004
