Getting Started Overview
7. Enter a System Name for the wireless switch. The specified name appears in the
lower-left corner of the configuration screens, beneath the navigation tree. This name
can be a useful reminder if multiple Symbol wireless switches are installed.
8. Enter a text description of the location of the switch in the System Location field.
This text is used as a reminder to the network administrator and is also used to set the
location variable if the switch is administered using SNMP.
9. Enter an email address for the administrator in the Admin Email Address field. The
switch will use this address for sending SNMP-related and other administration-related
messages to the administrator.
10. Select the Country for the switch from the drop-down menu. Selecting the correct
country is extremely important. Each country has its own regulatory restrictions
concerning electromagnetic emissions and the maximum RF signal strength that can be
transmitted by Access Ports. To ensure compliance with national and local laws, be sure
to set this field accurately.
11. Click Apply to save changes. Unapplied changes are lost if the administrator navigates
to a different screen.
Changing the Administrator Password
The password information set at the factory is the same for all WS 2000 Network Switches.
For security reasons, it is important to change the switch’s admin password as soon as
possible.
1. Select System Configuration --> WS-2000 Access from the left menu.
2. Click the Change Admin Password button. A sub-screen will appear.
3. Enter the current admin password (“symbol” if it hasn’t been changed previously), as
well as a new password (limited to 11 characters in length). Enter the new password a
second time in the field provided.
4. Click Update Password Now to set the new password.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 20
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004
