System Administration
Change the Location and Country Settings of the WS 2000
When the administrator first logs into the WS 2000 Network Management System, the
System Settings screen appears. One of the fields in this screen is the Country field.
This field is set to the country in which the switch is installed. Setting this field
appropriately ensures compliance with national and local laws concerning electromagnetic
emissions and the power level of Access Port radio transmissions.
To examine and change the location setting for the switch:
1. Select System Configuration --> System Settings from the left menu.
2. Type in a description of the physical location of the switch within your facility into the
Location field.
3. Find the Country field and use the drop down menu to select the correct country from
the list.
4. Click Apply to save changes. The interface will ask you to confirm any changes you
make to the Country selection.
Copyright © 2004 Symbol Technologies, Inc. All Rights Reserved 63
WS 2000 Wireless Switch: 1.0 Date of last Revision: March 2004
