Filter
Top Products
EXCEL 50/100/500/600/800 ATTRIBUTES
EN2B-0092GE51 R0512
39
Table 18. Datapoint attributes
totalizer input
pseudo totalizer
input
pseudo analog point pseudo digital point pseudo point multistage
User Address User Address User Address User Address User Address
Descriptor Descriptor Descriptor Descriptor Descriptor
Technical Address Suppress Point Access Level Access Level Point Enable
Suppress Point Access Level Write Protection Write Protection Access
Access Level Write Protection Operating Mode Operating Mode Write protection
Write Protection Operating Mode Value Value Operating Mode
Operating Mode Value Manual Value Manual Value Value
Value Manual Value Engineering Unit Alarm Type Value Manual
Manual Value Engineering Unit Low Warning Limit Alarm Delay Status Text
Engineering Unit Alarm Type Low Alarm Limit Alarm Status Alarm Type
Alarm Type Trend Logging High Warning Limit Point in Alarm Trend Logging
Trend Logging Scaling Factor High Alarm Limit Alarm Reporting Hours Run log
Scaling Factor Interval Limit Alarm Type Trend Logging Hours Run
Interval Limit Interval Value Alarm Delay Hours Run Log Maintenance Alarm
Interval Value Suppress Alarm Point in Alarm Hours Run Last Serviced
Suppress Alarm Trend Logging Service Interval Last Change
Alarm Status changed Active State Switch on Counter
Alarm Hysteresis Hours Since Serviced Number of Stages
Trend Hysteresis Active State Text Suppress Alarm
Trend Cycle Passive State Text NV Name and Index *
Suppress Alarm Cycle Count
NV Name and Index * Last Changed
Suppress Alarm
NV Name and Index *
* Read-only attribute. Changing the NV name and index requires changing the datapoint to NV mapping in CARE.