Filter
Top Products
2 - Installation
24
Table 2-2. Accessories (continued)
Item Manufacturer’s Part
Number
Description
Documentation Package Agilent E4373A Contains user documentation, software
drivers, and utility programs .
Serial cable Agilent 34398A RS-232 null-modem cable for port A or B.
(see figure 2-4 for schematic)
37-pin
D-sub connector
AMP 205210-2 Mating connector for front panel channel
connectors. Eight connectors are required
for each 64-channel card.
(Connector pins on 64-channel cards are
rated at 5 A maximum.)
Connector hood for 37-
pin connector
AMP 749916-2 Eight connector hoods are required for each
64-channel card.
Crimp style contacts for
37-pin connector
AMP 66506-9 Crimp contact for 37 pin connector
16 contacts are required for each connector.
(Pins only accept wires sized 20-24 AWG.)
Crimp tool for crimp
style contacts
AMP 58448-2 Hand crimp tool
Solder style contacts for
37-pin connector
AMP 66570-2 Crimp contact for 37 pin connector
16 contacts are required for each connector.
No tooling is required.
(Pins only accept wires sized 18 AWG.)
Front Panel Filler Panel Agilent p/n 5002-1505 One blank filler panel is required for every
empty slot in Agilent MCCD mainframes.
Rack mount Flange Kit Agilent p/n 5062-3979 Includes 2 flanges, fasteners, and mounting
screws
Rack mount Flange Kit
with Handles
Agilent p/n 5062-3985 Includes 2 handles, 2 flanges, fasteners, and
mounting screws
Table 2-3. Manufacturer's Addresses
Company Address Contact
Phoenix Contact P.O. Box 4100
Harrisburg, PA 17111-0100
Phone:717-944-1300
Fax: 717-944-1625
http://www.phoenixcontact.com/index.html
AMP Harrisburg, PA 17111 http://www.amp.com/
Agilent Technologies See list at back of this manual http://www.agilent.com/