Filter
Top Products
1 - General Information
10
Basic Functions
♦ Charger – The Agilent MCCD can deliver accurately controlled current and voltage into a cell for
proper forming. Each cell is independently paced through the cell forming sequence. This means that
some cells can be charging and others discharging if they are at different points in the sequence.
♦ Discharger – The Agilent MCCD can draw accurately controlled current from a cell for both
forming and capacity measurement.
♦ Measurement – The Agilent MCCD can monitor several parameters of the cell while charging,
discharging, and resting. Measurements include voltage, current, time, internal resistance, ampere-
hours, and watt-hours. These measurements are used to adjust the cell forming sequence for safety,
reliability, and or proper cell forming.
♦ Digital I/O control – The Agilent MCCD can monitor and stimulate digital I/O connected to it. This
simplifies wiring, allows ease of expansion, and is more reliable than a centralized control system. Its
high-speed capability is ideal for fast fault detection and system shutdown.
♦ RS-232 control – The Agilent MCCD can support peripherals connected to its serial ports for adding
printers, bar code readers, local terminals, robots and other types of local additional hardware via
pass-through control from the host computer.
♦ Equipment Protection – The Agilent MCCD has extensive safety features to protect both the cells
under formation and the hardware from equipment failure, programming errors, cell failures and
other types of external faults.
Additional Features
♦ LAN 10 base-T control using a web-server graphical user interface and an application programming
interface (API).
♦ Comprehensive data storage capability and remote data collection.
♦ Easily removable charger/discharger cards for minimum downtime if repair is required.
♦ Charge/discharge sequences that can be modified in software, allowing for simple, rapid changes to
the manufacturing process without changes to system hardware.
♦ Define and configure groups of contiguous blocks of cells or channels. This lets you simultaneously
run different sequences on groups of cells.
♦ Continuous calibration is performed on the programming circuits during the entire charge/discharge
sequence to eliminate errors due to temperature drift.
♦ Bi-directional power transfer and reuse of energy by using energy from discharging cells to provide
energy to charging cells.
Hardware Description
Agilent E4370A MCCD Mainframe
The Agilent E4370A MCCD mainframe is a full-width rack box that has 4 slots to hold either the Agilent
E4374A or Agilent E4375A 64-Channel Charger/Discharger cards. LEDs on the front of the mainframe
indicate system as well as card status (see Figure 1-2).