Filter
Top Products
23
2
Installation
Inspection
When you receive your equipment, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office
immediately. The list of Agilent Technologies Sales and Support Offices is at the back of this guide.
Warranty information is printed in the front of this guide.
Until you have checked out the Agilent MCCD, save the shipping carton and packing materials in case
the unit has to be returned. If you return the Agilent MCCD for service, attach a tag identifying the model
number, serial number, and the owner. Also include a brief description of the problem.
Parts and Accessories
Table 2-1 lists items that are included with your Agilent MCCD System.
Table 2-2 lists accessory items that are not included with the Agilent MCCD System, but must be
purchased separately. Except for the User’s Guide, all of these items are required to make connections
from the Agilent MCCD to either the computer, test fixture, or external devices that will be controlled by
the Agilent MCCD.
You can either order these items by ordering the appropriate kit, or order them directly from the
manufacturer. Table 2-3 lists the addresses of the manufacturers of the connector parts.
Table 2-1. Supplied Items
Item Part Number Description
Power Cord (1) Contact your
Agilent Sales and
Support office
A power cord appropriate for your location.
Table 2-2. Accessories
Item Manufacturer’s
Part Number
Description
Digital connectors (2) Phoenix
MSTB-2.5/10-STF
10-pin terminal plugs that connect to the digital
connectors on the back of the unit.
Calibration connector (1)
Auxiliary bias connector (1)
Phoenix
MSTB-2.5/4-ST
4-pin terminal plugs that connect to the
calibration and auxiliary connectors on the back
of the unit.