Filter
Top Products
The grill accessory consistsof two black grill grates,a grill element and two grill-rocks.
To Install Grill
1. Before installing grill components, be certainsurface controls arein the OFF position.
2. Place the two grill-rocks into an empty grill basin with their handles running parallel
to the front of the range. These grill-rocks must be used since they support the
grill element.
3. Position the grill element with the terminal plug towards the terminal receptacle.
This receptacle is located at the front of the left side end at the back of the right
side of the range. Slide the element towards the receptacle until the terminal plug
iscompletely engaged.
4. The grillelement should now reston the handles of the grill-rocks.
5. Place the black grillgrates on the top of the rangetop.
To Remove Grill
1. Remove grill components once they are cool. Be sure control switches ere in the
OFF position.
2. To remove gdll element, pull away from receptacle until it Is unplugged. Do not lift
theelement while it isengaged inthe receptaclesince this coulddamage the terminal.
3. A storage tray, Model A350, is availablefor purchase and can be used for storing
thegdll assembly.
Installing Other Accessories
1. Remove the two black grill grates from the grill. Now you are ready to use the
optional grill accessories.
2. Review the instructions for installing and using the accessoriesthat are packaged
with the accessory,
12