Filter
Top Products
Using.Cooktop
Cartridges
Cooktop cartridges, either conventional coil, glass-ceramic, solid element or
induction,can be installedoneithersideof the range.
To Install Cartridges
1. If the grill element, grill-rocks or grates are in place, removebefore installing
a cooktop cartridge. Clean grill basin of any grease accumulation. (See page
16for cleaning recommendations.)
2. To install any of the optional cooktop cartridges, first be sure control knobs
are turned OFF. Position the cartridge terminal plug towards the terminal
receptacle. This receptacle is located at the front of the left side and at the
back of the right side of the range.
3. Slide the cartridge towards the receptacle until the cartridge terminal plug is
completelyengaged.
4. Lowerthe oppositeend of the cartridge into the range top until it isflush with
the surface. Your cooktopis now readyto use.
To Remove Cartridges
1. Control knobs mustbe in the OFF positionand the cartridge should be cool
2. Lift up on the "tab" located on the cartridge until top of cartridge clears the
opening on the range by about 2 inches. Lifting the cartridge too high while
st(l(engaged (nthe receptaclecould damagethe terminal plug.
3. To disengage terminal, hold cartridge by the sides and slide away from the
terminal receptacle. Lift out when fully unplugged.
4. A storage tray, Model A350, is availableand can be usedfor storing a cartridge
(except the induction cartridge).
5. Do not stack cartridges where they may fall or be damaged. Never store other
materials on top of the glass-ceramic cartridges since this could damage or
mar the surface.
Home Canning
Cann{ngshouldbedoneonthe conventionalcoil orinductioncartridgeonly. Canning
element accessory, Model A145, makes it possible to use large canners with
conventionalcoil cartridge,
11