Filter
Top Products
Basic CLI Configuration 4-5
3
Add the following network administration information:
a
Configure the IP address.
>>> Enter the network name of your IP network [ip]:
>>> Enter the IP address for the RAS 1500 []:
b
Specify an IP mask. The default mask appears in brackets in the CLI
prompt.
>>> What should the mask be set to [C]?
c
Configure the default gateway. The default gateway gives the address
of a router that the RAS 1500 will forward packets to when it has no
other route to their destination.
The IP address for the default gateway cannot be the same address as the
IP address for the RAS 1500 nor can it be a broadcast address for its IP
address class.
>>> Enter the IP address of the default gateway []?
d
Enter the metric or “hop count.” The metric or hop count tells the
RAS 1500 how far the default router is from the unit.
>>> What metric should be applied to the default gateway [1]?
4
Save your changes by typing
save all.
At the end of the Quick Setup program you can review and change your
settings, if necessary. You can continue advanced configuration with the
CLI, or with TRAM.