Filter
Top Products
3-2 C
HAPTER
3: U
SING
TRAM
TO
C
ONFIGURE
THE
RAS 1500
Before You Begin
Before you begin, obtain the following information from your network
administrator and record the information in the space provided below.
See Appendix A,
Configuration Assistance
, for a more detailed
configuration worksheet.
Installing TRAM
To install TRAM:
1
Insert the Transcend
®
Remote Access Manager CD into the CD drive.
On most systems, TRAM 1500 launches itself and prompts you through
the installation. If not, follow these steps:
2
At the Windows 95 or NT desktop, click
Start
, then click
Run
.
3
In the Run dialog box, type:
<your CD drive letter>:\setup
4
Click
OK
.
5
Follow the instructions on the screen.
Ask your network administrator for Your value
Network name
IP address to assign to the RAS 1500 ___.___.___.___
IP network mask ___.___.___.___
Community string (SNMP password)
Default Gateway address ___.___.___.___
Default gateway metric
DNS Server address ___.___.___.___
DNS server domain name
IP addresses to assign incoming calls ___.___.___.___
___.___.___.___
Range of IP addresses to assign incoming calls ___.___.___.___
___.___.___.___
MAC address (from the sticker on the back of the RAS 1500)
User names and passwords