Filter
Top Products
Running TRAM 3-3
Running TRAM
From the Windows 95 or Windows NT 4.0 desktop, click
Start
, then
Programs
, then
Transcend Remote Access Manager
, then
Transcend
Remote Access Manager
. TRAM starts.
Basic TRAM
Configuration
Use the following steps to initially configure TRAM:
Before you can manage a RAS 1500 in TRAM, it must have an IP address.
Out of the box, a RAS 1500 does not have an IP address.
This procedure lets you assign an IP address, network mask, and
community string to a RAS 1500 that does not have an IP address. The
RAS 1500 must be connected to the same LAN segment as the TRAM
workstation and cannot have an IP address.
To assign an IP address to a device:
1
On the Tools menu, click
IP Assignment
.