Network Configuration Worksheets
A-11
8000-A2-GB21-30
April 1998
TASK 6: Reset the MCC Card
After configuring the MCC card for the management domain, reset the card to
install the configuration setting. On the Card Reset screen (
Configuration
→
Card
Status
→
Card Reset)
, reset the MCC card by entering yes at the yes/no:
prompt.
NOTE:
After resetting the MCC card, select a DSL card to continue with the
management domain configuration. To select a DSL card:
— Press Return to display the top-level menu (Hotwire Chassis menu).
— Select Card Selection from the Hotwire Chassis menu.
The Card Selection screen appears.
— Verify that the DSL card you want to configure appears on the Card
Status screen.
— At the Goto Card (M for MCC or slot# for DSL): prompt,
enter the number of the slot. Then, press Return. For example, if you
want to configure the DSL card in slot 4, enter 4.
The Hotwire – DSL menu appears.
