Network Configuration Worksheets
A-21
8000-A2-GB21-30
April 1998
Static Routes Screen A-E-A
Prompt Your Configuration Setting
3. Do
one
of the following:
– To create a default route, enter
0.0.0.0 at the Subnet:
(nnn.nnn.nnn.nnn): prompt, or
– To create a source route, enter a
host or subnet mask at the
Subnet:(nnn.nnn.nnn.nnn):
prompt.
Subnet Mask =
4. Enter the IP address of the next hop
at the Next Hop IP Address
(nnn.nnn.nnn.nnn): prompt.
Next Hop =
5. Enter a number at the Input
Number: prompt to specify the
measurement of preference for this
route over other routes for the same
destination.
1 has the highest preference. The
greater the number the lower the
preference.
Pref=
6. Enter dst or src at the Source
(Src)/ Destination(dst):
prompt. (Not for default routes.)
S/D=
7. Enter no or press Return at the
yes/no: prompt to keep the NO value
under the PA (proxy ARP) column.
(Not for default routes.)
PA= no
8. When the system highlights Save
Changes?, enter yes at the yes/no:
prompt.
