A SERVICE OF

logo

Open as PDF
next previous
IP Filtering Configuration Worksheets
B-7
8000-A2-GB21-30
April 1998
Binding the Filter
On the IP Network screen, indicate whether you want to use the filter you have
just defined on the IP Filter Configuration screen as an input filter or an output
filter for a specific interface on the MCC or DSL card.
NOTE:
When using the default input filter names, you do not need to complete a
worksheet. The default filter names are already bound to their corresponding
interfaces, and no further action needs to be done.
However, you will need to complete the following worksheet if you:
— Changed the default input filter name(s) on the IP Filter Configuration
screen, or
— Defined an output filter and that filter needs to be bound to a specific
interface.
Access the . . .
By . . .
IP Network screen
Selecting
Configuration
→
Interfaces
→
IP Network
from the appropriate menu (Hotwire – MCC menu
or the Hotwire – DSL menu).