SNMP Configuration Worksheets
C-4
8000-A2-GB21-30April 1998
SNMP Communities/Traps
Prompt Your Configuration Setting
3. For each community name, you can
enter IP addresses of up to three
SNMP NMS managers.
– At the (nnn.nnn.nnn.nnn):
prompt, enter the IP addresses of
the SNMP NMS managers.
– At the Input Number: prompt,
enter the port number for each
SNMP NMS manager specified. All
traps will go to the specified port.
– At the Enable/Disable: prompt,
indicate whether or not you want to
enable or disable the generation of
traps. Enter E to enable traps. This
will forward traps to the specified
SNMP NMS manager. Enter D to
disable traps. This prevents the
forwarding of traps.
public (RO) or ____________________:
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
mcc (RW) or ____________________:
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
nms (RW) or ____________________:
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
nms – 2 (RO) or ____________________:
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
H IP address =
Port =
Forward traps (E or D) =
