Network Configuration Worksheets
A-29
8000-A2-GB21-30
April 1998
You will need to assign a set of domain names that correspond with the already
configured Ethernet IP addresses (e1a interface) for the service domains on the
Domain Names screen.
The domain names are numbered 1 through 16 in the order in which they are
entered on this screen. Search for the domain name you want to configure for
dynamic IP addressing. Remember the number (1–16) for the specific domain
name you want to configure. You will need to configure the DHCP relay agent for
the domain name on the appropriate Servers screen (Servers 1-4, Servers 5-8,
Severs 9-12, or Servers 13-16). For example, if you want to configure the fourth
domain name on the Domain Names screen, then you will need to configure that
domain on the Servers 1-4 screen.
NOTE:
The full domain name will be displayed at the bottom of the page if the
character “n” is entered in any of the associated IP address fields.
In addition, for each port that has a DHCP end user, you should configure a
default domain in the Default DHCP Domain Index field. In this field, enter
the number associated with a configured DHCP server that you want to specify
as the default domain.
