A SERVICE OF

logo

Open as PDF
next previous
Network Configuration Worksheets
A-22
8000-A2-GB21-30April 1998
TASK 4: Select RTU Type
On the RTU Selection screen, select the RTU type.
Access the . . .
By . . .
Selection screen
Selecting
Configuration
→
RTU
→
Selection
from
the Hotwire – DSL menu.
RTU Selection Screen A-H-A
Prompt Your Configuration Setting
1. Enter 1 to 4 at the Port # prompt. Port number =
2. Enter the RTU type of the endpoint.
For Model 8540, selections are 5170,
5171, 5246, or 5216.
For Model 8546, selections are
5446r1, 5446r2, or 5546. The default is
5446r2.
For Model 8540:
RTU type =
For Model 8546:
RTU type =
Default is 5446r2.
3. Enter the RTU system name at the
System Name prompt.
System name =
4. Enter the RTU system contact at the
System Contact prompt.
System contact =
5. Enter the RTU system location at the
System Location prompt.
System location =