IP Filtering Configuration Worksheets
B-8
8000-A2-GB21-30April 1998
IP Network Screen A-C-B
Prompt Your Configuration Setting
1. Enter the interface name at the Input
Interface Name: prompt.
IP Interface = s1b
2. Enter
one
of the following:
– For the Input Filter field, enter the
desired filter name at the Filter
Name (blank to disable
filtering): prompt.
Use an input filter to prevent packets
entering the DSL card through a
specified interface from being
forwarded.
– For the Output Filter field, enter the
desired filter name at the Filter
Name (blank to disable
filtering): prompt.
Use an output filter to prevent
packets from going out of the DSL
card through a specified interface.
Input Filter =
or
Output Filter =
NOTE: Remember, if you are using the
default filter names as input filters, the
filters are already bound to their
corresponding interface.
