A SERVICE OF

logo

IP Routing Features
Configuring DHCP Relay
ProCurve(vlan-22)ip bootp-gateway 12.16.18.33
ProCurve(vlan-22)# exit
ProCurve(config)# show dhcp-relay bootp-gateway vlan 22
BOOTP Gateway Entries
VLAN BOOTP Gateway
-------------------- ---------------
VLAN 22 12.16.18.33
Figure 5-59. An Example of Assigning a Gateway to an Interface and then
Displaying the Information
Operating Notes
If the configured BOOTP gateway address becomes invalid, the DHCP
relay agent returns to the default behavior (assigning the lowest-
numbered IP address).
If you try to configure an IP address that is not assigned to that interface,
the configuration will fail and the previously configured address (if there
is one) or the default address is used.
5-130