IP Routing Features
Configuring OSPF
To clear the OSPF statistics for all VLAN interfaces on the switch and set all
VLAN/subnet counters for OSPF traffic to zero, enter the clear ip ospf statistics
command at any CLI level.
ProCurve(ospf)# show ip ospf statistics vlan 1
OSPF statistics for VLAN 1
OSPF Interface Status for 10.0.0.2
Tx Hello Packet Count : 16 Rx Hello Packet Count : 16
Tx DD Packet Count : 2 Rx DD Packet Count : 4
Tx LSR Packet Count : 1 Rx LSR Packet Count : 1
Tx LSU Packet Count : 5 Rx LSU Packet Count : 2
Tx LSA Packet Count : 2 Rx LSA Packet Count : 3
OSPF Errors: 26
Figure 5-43. Displaying OSPF Statistics for VLAN Traffic
Table 5-14. CLI Display of OSPF Statistics for VLAN Traffic
Per-VLAN OSPF Statistics
Field
OSPF statistics for
VLAN <vlan-id>
OSPF Interface Status
for <ip-address>
Tx/Rx Hello Packet
Count
Tx/Rx DD Packet
Count
Tx/Rx LSR Packet
Count
Tx/Rx LSU Packet
Count
Content
OSPF statistics displayed for the specified VLAN number
IP address of a subnet on the VLAN
Number of OSPF hello packets sent/received on each
subnet interface
Number of link-state database description packets sent/
received on each subnet interface
Number of link-state request packets sent/received on
each subnet interface
Number of link-state update packets sent/received on
each subnet interface
5-106
