Filter
Top Products
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
23
Figure 3-21 Finish page
3.2.3 Access Point
When you choose Access Point on Operation Mode page in Figure 3-7, take the following
steps:
1. Click Next in Figure 3-7, and then Wireless page will appear as shown in Figure 3-22. Create
an easy-to-remember name for your wireless network. Select Most Secure
(WPA/WPA2-PSK) mode and enter a wireless password below to prevent unauthorized
access to your AP. Then click Next.
Figure 3-22 Wireless
Wireless Network Name - Enter a string of up to 32 characters. The same Name (SSID)
must be assigned to all wireless devices in your network. The default SSID is set to be
TP-LINK _xxxxxx(xxxxxx indicates the last unique six characters of each Device's MAC
address), which can ensure your wireless network security. But it is recommended strongly
that you change your networks name (SSID) to a different value. This value is case-sensitive.
For example, MYSSID is NOT the same as MySsid.