Filter
Top Products
Technical Bulletin
SoundPoint
®
IP, SIP 2.1
2
Network Configuration Changes
The Network Configuration menu on the SoundPoint IP phone running SIP
2.1 has been modified to include:
• Syslog Menu
To access the Syslog menu:
1. From the idle display on a SoundPoint IP phone, press the Menu key.
2. Using the Down Arrow key and the Select soft key, select Settings >
Advanced > Admin Settings > Network Configuration.
You must enter the administrative password to access this menu. The
default value is “456”.
3. Using the Down Arrow key and the Select soft key, scroll down to Syslog
Menu.
Syslog Menu
The following syslog configuration parameters can be modified on the Syslog
menu:
Name Possible Values Description
Server Address dotted-decimal IP address
OR
domain name string
The syslog server IP address or host name.
The default value is NULL.
Server Type None=0,
UDP=1,
TCP=2
The protocol that the phone will use to write to the
syslog server.
If set to “None”, transmission is turned off, but the
server address is preserved.
Facility 0 to 23 A description of what generated the log message.
For more information, refer to section 4.1.1 of RFC
3165.
The default value is 16, which maps to “local 0”.
Render Level 1 to 6 Specifies the lowest class of event that will be
rendered to syslog. It is based on
log.render.level
and can be a lower value.
Refer to Basic Logging <level/><change/> and
<render/> on page 138 of the
SIP 2.0
Administrator’s Guide
.
Prepend MAC
Address
Enabled, Disabled If enabled, the phone’s MAC address is prepended
to the log message sent to the syslog server.