Filter
Top Products
<December, 2006>
3725-17483-001/A
Technical Bulletin 9268
Billing Code Entry on SoundPoint
®
IP Phones with Sylantro
This technical bulletin provides detailed information on how the SIP
application has been modified for billing code entry when managed by a
Sylantro call server.
This information applies to SoundPoint IP phones running SIP application
version 2.1 or later.
Introduction
Billing codes let administrators assign specific codes to all of their
organization’s outgoing calls.
When a SoundPoint IP phone managed by a Sylantro call server is configured
to require billing codes, calls are not connected until the a valid billing code is
entered.
The modified user interface on a SoundPoint IP phone running SIP 2.1 is
described in the following section, Billing Code Entry.
Billing Code Entry
This section describes the steps the user must perform to enter a billing code.
To enter a billing code when placing a call:
1. Do one of the following to a place a call:
a With the handset on-hook, enter the long-distance number (including
prefix).
You may need to press the Dial soft key to indicate you are finished
entering the number.
b Pick up the handset and enter the long-distance number (including
prefix).
Note
This feature is only supported on Sylantro call servers.