Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Addendum
Copyright © 2006 Polycom, Inc. 1
2 Addendum
This addendum addresses changes to the SoundPoint IP / SoundStation IP SIP 2.0
Administrator’s Guide made by the release of the SIP 2.1 application.
For more information, refer to the Release Notes for the SIP Application, Version 2.1 .
2.1 Added or Changed Features
2.1.1 Digit Map
Enhancements have been made to the local digit maps that can eliminate the need for
using the Dial or Send soft key when making outgoing calls. Refer to the “Technical
Bulletin 11572: Changes to Local Digit Maps on SoundPoint
®
IP Phones ” at
www.polycom.com/support/voip/ .
2.1.2 Billing Code
Billing codes let administrators assign specific codes to all of their organization’s out-
going calls. The prompt to signal employees to enter their billing codes has changed.
Refer to the “Technical Bulletin 9268: Billing Code Entry on SoundPoint
®
IP phones
with Sylantro ” at www.polycom.com/support/voip/ .
2.1.3 Syslog
Syslog is a de facto standard for forwarding log messages in an IP network. The
SIP application has been enhanced to support logging system level messages and error
conditions with communications networks to a centralized location. Refer to the
“Technical Bulletin 17124: Syslog on SoundPoint
®
IP Phones” at
www.polycom.com/support/voip/ .
Note
The various .hd. parameters in sip.cfg (such as voice.aec.hd.enable, voice.ns.hd.enable, and
voice.agc.hd.enable) are headset parameters. They are not connected to high definition or HD voice.