Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Addendum
Copyright © 2006 Polycom, Inc. 9
2.1.9.2 phone1.cfg
The following changes has also occurred in the phone1.cfg configuration file:
call.stickyAutoLineSeize.onHookDialing Null, 0, 1 Null If
call.stickyAutoLineSeize
is set to 1, this parameter
has no effect. The regular
stickyAutoLineSeize
behavior is followed.
If
call.stickyAutoLineSeize
is set to 0 or Null and this
parameter is set to 1, this
overrides the stickyAuto-
LineSeize behavior for
hot dial only. (Any New
Call scenario seizes the
next available line.)
If
call.stickyAutoLineSeize
is set to 0 or Null and this
parameter is set to 0 or
Null, there is no differ-
ence between hot dial and
New Call scenarios.
Attribute
Permitted
Values
Default Interpretation
reg.x.server.y.transport DNSnaptr or
TCPpre-
ferred or
UDPOnly or
TLS or
TCPOnly
DNSnapt
r
Refer to Interpretation
of voIp-
Prot.server.x.transport
in 2.1.9.1 sip.cfg on
page 6, the previous
section.
If specified, this
attribute may override
the value in sip.cfg.
reg.x.outboundProxy.transport DNSnaptr or
TCPpre-
ferred or
UDPOnly or
TLS or
TCPOnly
DNSnapt
r
Refer to Interpretation
of voIpProt.SIP.out-
boundProxy.transport in
2.1.9.1 sip.cfg on
page 6, the previous
section.
If specified, this
attribute may override
the value in sip.cfg.
Attribute
Permitted
Values
Default Interpretation