Filter
Top Products
Technical Bulletin
SoundPoint
®
IP, SIP 2.1
6
Digit Map <digitmap/>
The digit map syntax is the same as for the application configuration file (refer
to Digit Map <digitmap/> on page 3).
This configuration attribute is defined as follows:
dialplan.x.impossibleMatchHandling 0, 1 or 2 0 When present, and if
dialplan.x.digitmap
is not
Null, this attribute overrides
the global dial plan defined in
the sip.cfg configuration file.
For interpretation, refer to
Dial Plan in Application
Configuration File on page 2.
dialplan.x.removeEndOfDial 0, 1 1 When present, and if
dialplan.x.digitmap
is not
Null, this attribute overrides
the global dial plan defined in
the sip.cfg configuration file.
For interpretation, refer to
Dial Plan in Application
Configuration File on page 2.
Attribute
Permitted
Values Default Interpretation
Attribute
Permitted
Values Default Interpretation
dialplan.x.digitmap A string compatible with
the digit map feature of
MGCP described in
2.1.5 of RFC 3435;
string is limited to 768
characaters and 30
segments; a comma is
also allowed; when
reached in the digit map,
a comma will turn dial
tone back on;’+’ is
allowed as a valid digit;
extension letter ‘R’ is
used as defined above.
Null When present, this attribute
overrides the global dial
plan defined in the sip.cfg
configuration file.
For more information, refer
to Digit Map <digitmap/> on
page 3.