Filter
Top Products
Administrator’s Guide - SoundPoint
®
IP / SoundStation
®
IP Addendum
Copyright © 2006 Polycom, Inc. 9
1.1.7 USB Diagnostics
The SoundPoint IP 650 phone has a USB port, which will be supported by future
releases of the SIP application.
USB port parameters can be found in the USB <usb/> parameter in the sip.cfg config-
uration file.
Other changes to support a USB port can be found in the following parameter in the
sip.cfg configuration file:
• Basic Logging <log/>
Attribute Permitted Values Default Interpretation
usb.enable 0, 1 0 This parameter enables or disables the
USB port on the phone.
usb.bulkDrive.enab
le
0, 1 0 This parameter enables or disables
support for a USB bulk drive con-
nected to the USB port on the phone.
usb.bulkDrive.nam
e
alphanumeric
string
usb-
Drive
This parameter is a string which spec-
ifies the name of the mounted USB
drive.
Attribute
Permitted
Values
Default Interpretation
log.level.change.usb 0-5 4 Control
the logging detail
level for the usb compo-
nent. These are the input fil-
ters into the internal
memory-base
d log system.