Filter
Top Products
Technical Bulletin
SoundPoint
®
IP, SIP 2.1
3
Digit Map <digitmap/>
A digit map is defined either by a “string” or by a list of strings. Each string in
the list is an alternative numbering scheme, specified either as a set of digits or
timers, or as an expression over which the gateway will attempt to find a
shortest possible match.
Digit map extension letter “R” indicates that certain matched strings are
replaced. The following examples shows the semantics of the syntax:
•
R9RRxxxxxxx
—remove 9 at the beginning of the dialed number
— For example, if a customer dials 914539400, the first 9 is removed
when the call is placed.
•
RR604Rxxxxxxx
—prepend 604 to all 7 digit numbers
— For example, if a customer dials 4539400, 604 is added to the front of
the number, so a call 6044539400 is placed.
•
R9R604Rxxxxxxx
—replaces 9 with 604
•
R999R911R
—convert 999 to 911
•
xxR601R600Rxx
—when applied on 1160122 gives 1160022
•
xR60xR600Rxxxxxxx
—any 60x will be replaced with 600 in the middle of
the dialed number that matches
— For example, if a customer dials 16092345678, a call is placed to
16002345678.
dialplan.applyToUserSend 0, 1 1 This attribute covers the case when the
user presses the Send soft key to send
the dialed number.
Value interpretation is the same as for
dialplan.applyToCallListDial.
dialplan.impossibleMatchHandlin
g
0, 1 or 2 0 If set to 0, the digits entered up to and
including the point where an impossible
match occurred are sent to the server
immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate
digits and dispatch call manually with
the Send soft key.
dialplan.removeEndOfDial 0, 1 1 If set to 1, strip trailing # digit from digits
sent out.
Attribute
Permitted
Values Default Interpretation