Filter
Top Products
E-40
Other Useful Functions (Tutorial)
Setting Item
Display Text Description Settings
Transpose Transpose. Shifts the pitch of notes by semitone units. –12 - 0 - +12
Octave Shift Octave shift. Shifts the tone of notes by octave units. –3 - 0 - +3
Local Control
Local control. Turning off local control disables the Digital Piano’s internal
sound source, so nothing sound when keyboard keys are pressed. Turn off
local control when you want to use the Digital Piano keyboard and pedal
operations to operate an external sound source, without producing any sound
from the Digital Piano itself.
Off, On
High Reso Out High-resolution velocity MIDI out on/off. Off, On
Device ID
Device ID. Selects the ID number of the Digital Piano for MIDI system
exclusive message send/receive.
• While “All” is selected, a system exclusive message is sent regardless of the
ID number.
• For details about the ID number, see MIDI Implementation at
http://world.casio.com/.
1 - 16, ALL
Basic Ch
Basic channel. Specifies the receive channel of “Stage Set Change”, and other
MIDI messages described below.
1 - 16
MIDI Out Select
MIDI OUT select. Specifies what is output as MIDI OUT.
KEY (Keyboard): Digital Piano keyboard play, operations, etc.
MIDI (MIDI IN): Messages input via
fl
(MIDI IN) (MIDI THRU)
USB (USB IN): Messages input via
et
(USB)
Refer to the cell to the
left.
USB Out Select
USB out select. Specifies what is output as USB out.
KEY (Keyboard): Keyboard and other Digital Piano operations.
MIDI (MIDI IN): Messages input via
fl
(MIDI IN)
Refer to the cell to the
left.
MIDI In Enable
MIDI IN on/off (MIDI IN enable). While this setting is turned on, messages
input via
fl
(MIDI IN) are reflected by the Digital Piano’s internal sound
source.
Off, On
USB In Enable
USB IN on/off (USB IN enable). While this setting is turned on, messages input
via
et
(USB) are reflected by the Digital Piano’s internal sound source.
Off, On
Sync Mode
Sync mode. Settings for MIDI syncing between the Digital Piano and an
external device.
Off: No syncing.
Master: Outputs Clock, Start/Stop (Song Sequencer), and other signals from
the Digital Piano to control an external device.
Slave: Receives Clock, Start/Stop, and other signals from an external device.
• Song sequencer playback cannot be performed if a clock is not received.
Start/stop is regarded as song sequencer operation.
Refer to the cell to the
left.
Stage Set.Chg
Stage setup change.
PrgBnk: Program Change Bank = 70H. Also output when this operation is
performed.
NRPN: Select by NRPN MSB = 24H, LSB = 00H. Also output when this
operation is performed.
PrgBnk, NRPN