Filter
Top Products
E-32
Using the Stage Setups (Tutorial)
Key Range High
Key Range High. Specifies the high range of the keyboard for each zone.
This setting is used in combination with the Key Range Low setting to
configure key ranges for each zone.
• After pressing the
en
(NUM KEY) button to enter the number input
mode, you can use the keyboard keys to enter values.
C- - G9
Velo.Range Low
Velocity range low. This is the minimum velocity value of each zone. This
setting is used in combination with the Velo.Range High setting below to
configure velocity ranges for each zone.
0 - 127
Velo.Range
High
Velocity range high. This is the maximum velocity value of each zone. This
setting is used in combination with the Velo.Range Low setting above to
configure velocity ranges for each zone.
0 - 127
Volume
Volume. This setting is the same as the mixer function part volume (page
E-37).
0 - 127
Pan
Panning. Adjusts the left-right position of sound in the stereo field. This
setting is the same as the mixer function part panning (page E-37).
–64 - 0 - +63
Coarse Tune Coarse tune. Shifts the pitch of notes by semitone units. –24 - 0 - +24
Fine Tune
Fine tune. This setting is the same as the mixer function part fine tune (page
E-37).
–99 - 0 - +99
Bend Range
Down
Bend range down. Pitch change amount for downward bender operation. 0 - 24
Bend Range Up Bend range up. Pitch change amount for upward bender operation. 0 - 24
Chorus Send Chorus send. This setting is the same as the mixer chorus send (page E-37). 0 - 127
Delay Send Delay send. This setting is the same as the mixer delay send (page E-37). 0 - 127
Reverb Send Reverb send. This setting is the same as the mixer reverb send (page E-37). 0 - 127
Resonance Send
Resonance send. Enables/disables send to the resonance function of each
zone.
Off, On
Reso.Return
Level
Resonance return level. This setting is the same as the mixer resonance
return (page E-37).
0 - 127
Controller Edit >Ent Controller parameters. This is a group of editable controller parameters.
Knob1 Enable
Knob 1 on/off (Knob 1 enable). Enables/disables
3
(K1) operation for each
zone.
Off, On
Knob2 Enable
Knob 2 on/off (Knob 2 enable). Enables/disables
3
(K2) operation for each
zone.
Off, On
Knob3 Enable
Knob 3 on/off (Knob 3 enable). Enables/disables
3
(K3) operation for each
zone.
Off, On
Knob4 Enable
Knob 4 on/off (Knob 4 enable). Enables/disables
3
(K4) operation for each
zone.
Off, On
Slider1 Enable
Slider 1 on/off (Slider 1 Enable). Enables/disables
4
(S1) operation for each
zone.
Off, On
Slider2 Enable
Slider 2 on/off (Slider 2 Enable). Enables/disables
5
(S2) operation for each
zone.
Off, On
Slider3 Enable
Slider 3 on/off (Slider 3 Enable). Enables/disables
6
(S3) operation for each
zone.
Off, On
Slider4 Enable
Slider 4 on/off (Slider 4 Enable). Enables/disables
7
(S4) operation for each
zone.
Off, On
Slider5 Enable
Slider 5 on/off (Slider 5 Enable). Enables/disables
8
(S5) operation for each
zone.
Off, On
Slider6 Enable
Slider 6 on/off (Slider 6 Enable). Enables/disables
9
(S6) operation for each
zone.
Off, On
Bender Enable
Bender on/off (bender enable). Enables/disables
1
(BENDER) operation
for each zone.
Off, On
Wheel Enable
Modulation wheel on/off (wheel enable). Enables/disables
2
(MODULATION) operation for each zone.
Off, On
Pedal1 Enable
Pedal 1 on/off (pedal 1 enable). Enables/disables operation of a pedal
connected to
fk
(DAMPER/PEDAL 1) for each Zone.
Off, On
Display Text Description Settings