Filter
Top Products
Using the Stage Setups (Tutorial)
E-33
Pedal2 Enable
Pedal 2 on/off (pedal 2 enable). Enables/disables of
fk
(PEDAL 2) for each
zone.
Off, On
Arpeggio
Enable
Arpeggio on/off (arpeggio enable). Enables/disables arpeggio function
(page E-24) for each zone.
Off, On
Arpeggio Select
>Ent
Arpeggio select. This is a group of editable arpeggio function parameters.
Target
Target. Selects playback of an arpeggio (Arp) or phrase sequencer (Phr) by
the arpeggio function. For details, see “To play a recorded phrase as an
arpeggio” (page E-24).
Arp, Phr
Arpeggio
Number
Arpeggio number. Use this setting to select an arpeggio number (page E-24). P000 - U199
Arp.Phrase
Numb
Arpeggio phrase number. Select the number of the phrase to be played back
when the arpeggio target (Target) is “Phrase”. For details, see “To play a
recorded phrase as an arpeggio” (page E-24).
U000 - U999
Original Key
Original key. Specifies playback in the original key used for recording when
performing key play. For details, see “To play a recorded phrase as an
arpeggio” (page E-24).
C- - G9, Fix
MIDI Edit >Ent
MIDI parameter. This is a group of MIDI-related (page E-39) editable
parameters. Use the
dk
(ZONE) minus (–), plus (+) buttons to select one of
the Digital Piano’s 16 sound source parts for editing.
Octave Shift Octave shift. Shifts the tone of notes by octave units. –2 - 0 - +2
Transpose
Transpose. Shifts the pitch of notes by semitone units. This setting is the
same as the mixer function part coarse tune (page E-37).
–12 - 0 - +12
External Out Ch
External send channel (external out channel). Specifies the MIDI channel
(page E-39) for sending information about each part by MIDI to an external
destination.
1 - 16
Generator Out
Internal send (Generator Out) on/off. Specifies whether or not to send
information about each part to the Digital Piano’s internal sound source.
Off, On
MIDI Out
MIDI output (MIDI Out) on/off. Specifies whether or not MIDI send of the
information of each part is performed from
fl
(MIDI OUT/THRU).
Off, On
USB Out
USB output (USB Out) on/off. Specifies whether or not MIDI send of the
information of each part is performed from
et
(USB).
Off, On
Prog & Bank
Out
Program change and bank MSB send on/off. Enables/disables MIDI
external send of information about each part from program change (Prg) or
bank MSB (Bnk).
Off, Prg, Bnk
PrgBank Edit
>Ent
This is a group of program change and bank MSB editable parameters
(program change/bank MSB edit). Editing can be performed even when the
“ProgBank Out” setting is “Off”.
Bank MSB Bank MSB. Inputs a program change bank MSB value. 0 - 127
Bank LSB Bank LSB. Inputs a program change bank LSB value. 0 - 127
Prog.Change Program change. Inputs a program change value. 1 - 128
System Effect Edit >Ent
System effect parameter. This is a group of editable system effect parameters
(page E-18).
For details about group items, see “Editable SYSTEM Parameters”
(page E-23).
Chorus Edit >Ent
Chorus edit. This is a group of editable chorus parameters within the system
effects.
Delay Edit >Ent
Delay edit. This is a group of editable delay parameters within the system
effects.
Reverb Edit >Ent
Reverb edit. This is a group of editable reverb parameters within the system
effects.
String Reso Send String resonance send. Adjusts the send level to string resonance. 0 - 15
Damper Reso Send Damper resonance send. Adjusts the send level to damper resonance. 0 - 15
Damper Noise
Enable
Damper noise enable. Enables/disables the damper noise effect. Off, On
Display Text Description Settings