Filter
Top Products
Using the Stage Setups (Tutorial)
E-35
Slider1-6 Edit >Ent
Slider 1 to 6 edit. This is a group of
4
Slider (S1) through
9
Slider (S6)
editable parameters. Editing can be performed even when the “Slider 1-6
Enable” setting is “Off”. Details of editable parameters are the same as
“Knob1 Edit >Ent”, above.
Modulation Edit
>Ent
Modulation wheel (modulation wheel edit). This is a group of
2
(MODULATION) wheel editable parameters. Editing can be performed
even when the “Wheel Enable” setting is “Off”. Details of editable
parameters are the same as “Knob1 Edit >Ent”, above.
Pedal1 Edit >Ent
Damper/Pedal 1 (Pedal1). This is a group of editable parameters for the
pedal connected to
fk
(DAMPER/PEDAL 1). Editing can be performed even
when the “Pedal1 Enable” setting is “Off”.
Pedal Target
Edit >Ent
Specifies the function of the pedal connected to
fk
(DAMPER/PEDAL 1).
Details of editable parameters are the same as “Target”, above.
On Rate On rate. On value change rate. 0 - 127
Off Rate Off rate. Off value change rate. 0 - 127
Pedal2 Edit >Ent
Pedal2. This is a group of editable parameters for the pedal connected to
fk
(PEDAL 2). Editing can be performed even when the “Pedal2 Enable”
setting is “Off”. Details of editable parameters are the same as “Pedal1 Edit
>Ent”, above.
Display Text Description Settings