show tcp statistics
Display statistical information about TCP traffic transmitted on Z9500 CPUs.
Z9500
Syntax
show tcp statistics {all | cp | rp}
Parameters
all Enter the keyword all to view all TCP statistics on Z9500
CPUs.
cp Enter the keyword cp to view TCP statistics only from the
Control Processor.
rp Enter the keyword rp1 to view TCP statistics only from the
Route Processor.
Command
Modes
EXEC Privilege
Default Display TCP information from all processors.
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
6.4.1.0 Introduced
Usage
Information
The following describes the show tcp statistics cp command shown in the
following example.
Field Description
Rcvd: Displays the number and types of TCP packets received by
the switch.
• Total = total packets received
• no port = number of packets received with no
designated port
IPv4 Routing
987
