43
Quality of Service (QoS)
The Dell Networking operating software commands for quality of service (QoS) include traffic
conditioning and congestion control.
This chapter contains the following sections:
• Global Configuration Commands
• Per-Port QoS Commands
• Policy-Based QoS Commands
Global Configuration Commands
There is only one global configuration QoS command.
qos-rate-adjust
Enable QoS rate adjustment to include overhead fields in rate metering calculations.
Z9500
Syntax
qos-rate-adjust overhead-bytes-number
Parameters
overhead-
bytes-number
Enter the number of bytes of packet overhead to include in
rate limiting, policing, and shaping calculations. The range is
from 1 to 31.
Defaults QoS rate adjustment is disabled by default.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
Quality of Service (QoS)
1473
