show fip-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address,
FCF interface, VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
Z9500
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-
address
Enter the MAC address of the FCF to display.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the Z9500 and S6000-ON.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
Usage
Information
The following describes the show fip-snooping fcf command shown in the
following example.
Field Description
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is
connected.
VLAN VLAN ID number the session uses.
FC-MAP FC-Map value the FCF advertises.
ENode Interface Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIO
D
Time (in milliseconds) during which FIP keep-alive
advertisements transmit.
No of ENodes Number of ENodes connected to the FCF.
FC-ID Fibre Channel session ID the FCF assigns.
Example
Dell# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enodes
772
FIP Snooping
