Version Description
8.3.7.0 Introduced on the S4810.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced on the E-Series.
Related
Commands
show ip traffic — displays IP traffic statistics.
clear tcp statistics
Clear TCP counters.
Z9500
Syntax
clear tcp statistics [all | cp | rp]
Parameters
all Enter the keyword all to clear TCP statistics maintained on
all switch processors.
cp (OPTIONAL) Enter the cp to clear TCP statistics only from
the Control Processor.
rp (OPTIONAL) Enter the keyword rp1 to clear TCP statistics
only from the Route Processor.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
IPv4 Routing
933
